Being in the 3D printing field, I make certain you would have seen this MK6, MK8, MK10 and E3D V6 terms sprayed without recognizing the real differences. I have made this message for that specific factor, to layout and explain, contrast and answer what makes each nozzle various.
Depending upon what 3D printer you have, there will be a particular extruder that works for you.
The MK6, MK10, MK8 & E3D V6 are a collection of hot ends, extruders as well as nozzle combinations which collaborate to make a system which enables filament to go through the 3D printer to the nozzle, referred to as an extrusion system. There is compatibility in between the MK6, MK8 & V6 array.
The name ‘MK’ transpired by the typical method of identifying versions in a series of items (shortened from Mark). It’s similar to exactly how armed forces offer number classifications to their arsenal (Mk 6 attack watercraft) or perhaps the British Train manufacturing collection (Mark 1, 2, 3 British Rail coaches).
It started with the Makerbot brand name starting their very own collection of hot ends using MK as their structure.
It started from MK1 as well as to my expertise has gone all the way up to MK11 up until now, but it isn’t very common in the mainstream 3D printing market. The mains ones you would have stumbled upon are the MK8, MK10 & E3D V6 array.
I’m going to get into the details of what makes each nozzle different, while additionally contrasting compatibility and various other bits of details so keep reading to figure out.
Make sure if you are getting an extruder, it is compatible with your 3D printer. The differences between the nozzle types are quite small, yet it can make a difference. If you make use of the wrong nozzle on a hot end, it could simply not work or might result in some damage.
The MakerBot Replicator was accountable for the all brand-new twin extruder hot end configuration called the MK8. It had a cooling bar which was thicker than the MK7 variety yet it shared the same all-metal thermal barrier.
The MK8 had small distinctions in the nozzle geometry from within and on the surface, which allegedly had a favourable impact on printing performance.
An MK8 nozzle has sharper, much more tilted sides coming off the suggestion of the nozzle, implying it’s not as flat as various other nozzles. It has an extremely pointy look to it from the sides right via to the idea.
The MK8 nozzle likewise uses the M6 threading dimension. This indicates an MK8 nozzle can be made use of with an MK6 extruder as well as vice versa. You can examine the dimension of the strings of your nozzles by using some easy callipers, which is a necessary part of the 3D printing device package.
If you do not have callipers, I would certainly advise the Rexbeti Digital Calipers. It’s a stainless-steel, waterproof gauging device that enables you to determine specifically with the smooth procedure. It’s extremely dependable and also should last you years to find. The huge LCD screen, easy reset button and huge battery are just several of the key features.
Among the very best MK8 nozzle collections I can find on Amazon is the Disacayson 0.4 mm Nozzle with Free Storage Box (30 pcs). It has the highest possible scores out there for MK8 nozzles, it’s very easy to install, and they have a one-month official refund policy, so contentment assured!
3D Printer Compatibility
MK8 – Makerbot, Creality CR10, Ender 3 Pro, Tevo Tornado, Anet A8, Prusa I3 and more.
Also Read: Best 3D Printer for Flexible Filament
MK10 was a full change of the hot end, utilizing the MK9 as a base version (uses MK9 feeder parts). With this range of hot ends, you have smooth OD thermal barriers in addition to a 4mm OD 2mm ID PTFE lining. One of the main differences is the MK10 utilizes M7 strings instead of the M6 strings which all the previous designs make use of.
The primary factor for this is because a 4mm PTFE lining does not have sufficient steel to make the external tube with M6 strings. You will not have the ability to use the MK10 variety with any other previous hot end versions because they have different sized threads.
So ensure you don’t buy an MK10 nozzle if you have an MK8 extruder and also vice versa. MK10 is completely incompatible with all previous hot end components. Every part is different.
For a solid MK10 nozzle collection, the Umlife MK10 Brass Nozzle Establish is a great option. It features:
- 4x 0.4 mm nozzles
- 1x 0.2 mm nozzle
- 1x 0.3 mm nozzle
- 1x 0.5 mm nozzle
- 1x 0.6 mm nozzle
- 1x 0.8 mm nozzle
- 1x 1mm nozzle
- 5x cleaning needles
3D Printer Compatibility
MK10 – Monoprice Maker Select, Wanhao Duplicator i3 (D4, D6), Qidi Tech, Cacoon Create, FlashForge Creator (Dreamer, Finder)